Instalar monitoreo con Cacti

How-To: Monitor your servers with SNMP and Cacti

How-To: Monitor your servers with SNMP and Cacti SNMP (Simple Network Management Protocol) is a protocol for managing networks. Each managed entity in the network will run an snmp server (snmpd) which is going to collect datas from the server such as networking, load, cpu ...

Cacti on the other hand is a frontend to the RRDTool with SNMP support. It collects and keep data in a MySQL database and display them through a PHP web frontend.

This tutorial will show how to configure the network manager to use Cacti and how to set up snmp on the managed host.

In this how-to, we are going to run the SNMP server and cacti on the same host and bind the service to localhost. This way, SNMP service won't be accessible from the outside. This is a good configuration when all you want to do is monitoring your home network router for instance. If you intend to deploy this on a network, just keep in mind that SNMP server as to accept connection from the manager network wise (The remote IP need to be able to connect to the server) and within SNMPD configuration (The service as to return collected datas to the manager).

In the first part of this article, we are going to install and configure the SNMP server. A second part will present how to install and configure Cacti on the manager. Finally, we are going to configure Cacti to collect and display CPU, Load, Memory and Network statistic of the SNMP server.

This article was made using Debian Etch and Ubuntu Feisty but should also work out of the box for previous version of those distributions.

1. SNMPD SNMPD is the service running SNMP on a managed entity. SNMP comes in 3 versions. Version 1, the one we are going to use here is not secured, therefore we are going to make sure that only localhost is going to be able to access it. People opening the service to the outside should make sure that trusted hosts can access the service either though the use of iptables or through the use of /etc/hosts.allow.

1.1. Installing the SNMP server The only package which is required on the server site is snmpd, the SNMP daemon.

To install it type:

$ sudo apt-get install snmpd

snmpd is now installed but we still have to tweak it a little bit to make it work as we want.

1.2. Configuring SNMPD The first thing we want to make sure is that snmpd is only going to wait for connections on localhost. To do this, edit file /etc/default/snmpd and make sure those values are set:

SNMPDRUN=yes SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -I -smux -p /var/run/snmpd.pid 127.0.0.1'

If you want your server to listen on all interfaces, remove the 127.0.0.1 bit.

This setting will make sure that the service will be started and that the service is going to bind to localhost.

Finally, we are going to configure snmpd in such a way that it will only return datas to trusted host for a specific community.

Edit /etc/snmp/snmpd.conf and make sure that com2sec it only set to:

com2sec readonly localhost mycommunity

If you want a remote machine to be able to gather information for the community mycommunity, make sure you replace localhost by mynetwork, where mynetwork can be of the form: 1.1.1.1 or 1.1.0.0/16.

1.3. Checking SNMP configuration: We are going to use the snmpwalk utility to verify that the server is working as wanted.

Here we want snmp to reply only to localhost for the community mycommunity.

From localhost

$ snmpwalk -Os -c mycommunity -v 1 localhost system

Should return a lot of output and:

snmpwalk -Os -c public -v 1 localhost system Timeout: No Response from localhost

If the second command returns result, it might be because you did not comment the line starting with com2sec.

Now that we have our snmp server up and running, we are going to install cacti to manage the snmp server in our network.

2. Installing Cacti Cacti displays system statistics through a PHP/MySQL web interface.

To gather informations, it runs a script which is going to poll the servers you registered in cacti: /usr/share/cacti/site/poller.php.

So, let's get started an install cacti.

2.1. Installing Cacti packages and dependencies

1. apt-get install mysql-server apache2 libapache2-mod-php5 php5-mysql php5-cli php5-snmp
2. apt-get install cacti

Note: because I am using php5, I had to install all the required php5-xx packages before I installed cacti. If you don't install those first, cacti will fall back to apache2 with php4.

While installing cacti, you are going to be asked a few question, answer as follow:

configuring libphp-adodb -> press ok configuring cacti configure database for cacti with dbconfig-common -> press yes password of your database's administrative user -> mysql root password (empty by default, fill accordingly) mysql application password for cacti -> give the password you would like cacti to connect to mysql with webserver type -> Apache2

Now, cacti is installed, let's configure it:

2.2. Configuring Cacti Now, cacti is installed as well as its database. We still need through a few configuration screens before we can start adding servers to monitor.

Let's go to http://your-manager-server.ip/cacti/

Click next to the first screen Select new install and check that the found informations are correct Check that everything is [FOUND] Click Finish Finally, you should be landing on the login page. Log in with username: admin and password: admin. The next screen will force you to change your password.

On the first login, the default account is admin with password admin

Voila, our manager is up and running, the last step is to create new Devices (adding new hosts to our manager).

3. Adding new devices to cacti A device can be anything which is SNMP enabled. It could be a router, a switch....

In our example, we are going to add the server we configured in the first part of this tutorial. The server is on localhost, but it could be anywhere on a network, as long as our manager host is allowed to connect to its SNMP port.

3.1. Creating a new device To create a new device, first make sure you are in the "Console", if not, click on the "Console" tab on the top left and click on Create devices for network. This will bring you to a new page where you are going to give details about the SNMP host.

Fill up the form and make sure you have the following value properly set:

Hostname to localhost or whichever url/address your SNMP server can be found at Host Template to ucd/net SNMP Host SNMP Community to mycommunity or whatever your community is called SNMP Version to Version 1 SNMP Port default is 161 which should be fine for 99% settings. Change accordingly to your SNMP server settings Then Click create and you should get to a page where you get something similar to:

MySNMPServer (snmp.server.ip) SNMP Information System: Linux hostname kernel-version #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686 Uptime: 980871 (0 days, 2 hours, 43 minutes) Hostname: hostname Location: Unknown (configure /etc/snmp/snmpd.local.conf) Contact: Root root@localhost (configure /etc/snmp/snmpd.local.conf)

and not like:

SNMP Information SNMP error

If you get the latest output, this means that the connection between the manager and the SNMP host could not be established, either firewalled or refused by the host. Use snmpwalk -Os -c mycommunity -v 1 snmp.server.ip system to troubleshoot.

3.2. Creating a new Graph for a device OK, sweet, we have enabled our first host to be monitored by cacti. Now, let's add a few graphs.

Click the "Create Graphs for this Host" and check the boxes you want to monitor (CPU Usage, Load Average, Memory Usage).

Under "Data Query [SNMP - Interface Statistics]", check the interfaces you want to monitor and finaly in "Select a graph type" choose the kind of stats you want. I chose "In/Out Bytes with Total Bandwidth".

Validate, and that's it, you will start monitoring some componenets of your device. Now, lets organize our graph tree.

3.3. Creating a Graph Tree Cacti graphs are organied in a tree. Each host could be a branch of that tree. We are now going to create a branch for our device.

Create a graph tree by going to the left menu and click on "Graph Tree" and "add" on the right side of the new page.

Enter a name to describe your device and click create.

Add a "Tree Item" and select:

Parent Item [root] Tree Item Type Host Host yourhost Graph Grouping Style Graph Template

And create!

Here we are!!! Now click on the "Graph" tab and select your host from the tree.

Voila! Mind that you will need some times before you can see datas.

4. Conclusion Once you have been able to set up a first host to work with cacti, it is fairly easy to add other host from your network. Simply cnfigure the snmp server in such a way that the machine hosting cacti will be able to contact them.

In this tutorial, the security was preserved by binding the service to localhost and changing the default community name from public to mycommunity. If you start deploying SNMP over the network, I would recommend that you only accept traffic to port 161 (default SNMP port) to trusted host. Iptbables will become of great help.